|
|
Post by Pedropotter on Mar 9, 2010 20:47:30 GMT
My mrs has buggered the tele up. Its a sony bravia. My Sky tv is on 'AV1', and until last night you could just turn it off and on and it would be on AV1 and Sky TV would come on. As of this morning you turn it on and its on 'TV' not 'AV1', so you have to use the original; remote control to change it from TV to AV1. Any knowlegable types know how to reset it so that AV1 comes on when you turn it off and on again? I hate teknolergy me!  Cheers |
|
|
|
Post by kitkatkev on Mar 10, 2010 2:25:14 GMT
Shoot her for touching the remote
|
|
|
|
Post by tassiepotter on Mar 10, 2010 3:05:12 GMT
Look for the input or source button and keep pressing until it changes to AV1
|
|
|
|
Post by Pedropotter on Mar 10, 2010 8:11:48 GMT
Look for the input or source button and keep pressing until it changes to AV1 I'll try that later, thanks.  |
|
|
|
Post by jumborat on Mar 10, 2010 9:36:37 GMT
Is it a normal Sky/Sky+ box? If so press SERVICES on the Sky remote then select system setup then picture settings. Make sure 'scart control' is set to on and save the settings. The TV should autoswitch the Sky when the box is switched on.
One tip with the Sky remote (provided you've got it set to operate your TV's volume,etc) is when the TV button has been pressed the help button will cycle through your TV's inputs and the play button will cycle through the picture sizes such as 16:9, 4:3, zoom, etc.
|
|
|
|
Post by scfcmacca on Mar 10, 2010 11:37:50 GMT
why did you let her out the kitchen?
and it cant be that bad can it pressing a button on a remote to put the sky channel on
|
|
|
|
Post by garavel on Mar 10, 2010 17:04:54 GMT
Any possibility of cable connections been changed?
|
|
