|
|
Post by JetBlack on Dec 6, 2007 8:13:45 GMT
Mornin mate, you seem clued up on how to post Avatars etc. . I aint got a website, so could I use my webshots pictures to post an avatar?
|
|
|
|
Post by daverichards on Dec 6, 2007 8:22:21 GMT
yes, you can link to any picture that is on the net, so your webshots pics should be fine . you will need to play around with the sizes though . when you link the URL in the modify profile box, the 2 boxes below Avatar URL box are for adjusting the size , play around with the numbers till it gets the sizing right . think 100 or 120 is the max
|
|
|
|
Post by JetBlack on Dec 6, 2007 8:23:39 GMT
Okay, I'll try to do it!!! Ta for answering.
|
|
|
|
Post by JetBlack on Dec 6, 2007 8:36:32 GMT
Test.
(http://good-times.webshots.com/photo/2456265190101031961QeQEYB)
|
|
|
|
Post by Mr Claypole on Dec 6, 2007 9:58:11 GMT
|
|
|
|
Post by JetBlack on Dec 6, 2007 10:04:25 GMT
Thanx MR. C you wont believe how many times I tried it earlier. Wouldn't accept the URL I pasted into it.
Was it because I was putting the address in for the picture itsself, rather than the thumbnail?
Thanx again mate.
BJet
|
|
|
|
Post by Mr Claypole on Dec 6, 2007 10:27:50 GMT
No probs. I think that picture would go down well on the brown wings thread!!  |
|
|
|
Post by Big Al on Dec 6, 2007 18:41:14 GMT
dave can you help how do you do the moving signature thing like your come on stoke
|
|
|
|
Post by daverichards on Dec 6, 2007 19:42:55 GMT
it took a fair bit of patience .
you need to open up a reply box like this first, that has all the keys at the top (not a quick reply box)
then you need to write what you want , in different colours ... each letter has to be done individually .
[ color=Blue]C[ /color] like that (remove the spaces in square brackets and it comes out like this C then put the whole lot inside [ size=2] [ /size] some size brackets (again space added so they don't work here) , then PUT all of that between the [ move] [ /move] brackets
so you would get something like this [ move][ size=4][ color=Blue]C [ /color][ color=Orange]O[ /color][ /size][ /move]
I have added a space into each square bracket so that you can see the code required .
Once you have done all that, you need to copy and paste the whole lot into the signature box in the modify profile section
|
|
|
|
Post by Big Al on Dec 6, 2007 19:51:55 GMT
Thats great mate many thanks
|
|
